Network Video Recorder NVR-CV NVR-CV Network Video Recorder Hot-Swappable Tray for 3.5” HDD x 4 or 2.5” HDD x 4 Gigabit Ethernet x 2 COM x 2, USB2.0 x 6 VGA x 1, DVI-D x 1 NVR-CV Manual 1st Ed. Oct.
Network Video Recorder NVR-CV Copyright Notice This document is copyrighted, 2013. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable.
Network Video Recorder NVR-CV Acknowledgments All other products’ name or trademarks are properties of their respective owners. AMI is a trademark of American Megatrends Inc. CompactFlash™ is a trademark of the Compact Flash Association. Intel® is a trademark of Intel® Corporation. Microsoft Windows is a registered trademark of Microsoft Corp. ITE is a trademark of Integrated Technology Express, Inc.
Network Video Recorder NVR-CV Packing List Before you begin installing your card, please make sure that the following materials have been shipped: 1 CD-ROM for Manual (in PDF Format) and Drivers 1 NVR-CV If any of these items should be missing or damaged, please contact your distributor or sales representative immediately.
Network Video Recorder NVR-CV Contents Chapter 1 General Information 1.1 Introduction................................................................ 1-2 1.2 Features .................................................................... 1-3 1.3 Specifications ............................................................ 1-4 Chapter 2 Hardware Installation 2.1 Mechanical Drawing .................................................. 2-2 2.2 Installing the 3.5” Hard Disk Drive.............................
Network Video Recorder NVR-CV Chapter 1 General Information Chapter 1 General Information 1- 1
Network Video Recorder NVR-CV 1.1 Introduction ® NVR-CV adopts the Intel Atom TM D2550 Dual Core Processor and ® equips with Intel ICH10R chipset. Moreover, the system memory features two 204-pin Single Channel DDR3 1066/800 non-ECC, un-buffered DIMM memory up to 4GB. It deploys two LAN ports that consist of 10/100/1000Base-TX Ethernet RJ-45 ports. NVR-CV features desktop form factor for network video recorder applications. This NVR-CV supports up to four 3.5” Hard Disk Drive or four 2.
Network Video Recorder NVR-CV 1.2 Features ® Intel Atom™D2550 Dual Core Processor Intel ICH10R Chipset 204-pin Single Channel DDR3 1066/800 Non-ECC, ® Un-buffered DIMM Memory Up To 4GB 10/100/1000Base-TX Ethernet x 2 Hot-Swappable Tray for 3.5” HDD x 4 or 2.5” HDD x 4 COM x 2 USB2.
Network Video Recorder NVR-CV 1.3 Specifications System ® CPU Intel Atom™ D2550 Dual Core Processor, 1.
Network Video Recorder NVR-CV Mechanical Dimension 7.87” x 9.84” x 11.93” (200mm x 250mm x 303mm) Gross Weight 17.6 lb (8 Kg) Net Weight 15.4 lb (7 Kg) Environmental Operating Temperature 32°F ~ 104°F (0°C ~ 40°C) Storage Temperature -4°F ~ 140°F (-20°C ~ 60°C) Storage Humidity 10%~80% @40°C; non-condensing 0.5 g rms/ 5~500Hz/ operation (2.5” HDD) 1.5 g rms/ 5~500Hz/ non-operation 10 G peak acceleration (11 m sec. duration) operation 20 G peak acceleration (11 m sec.
Network Video Recorder NVR-CV Chapter 2 Hardware Installation Chapter 2 Hardware Installation 2-1
Network Video Recorder 2.
Network Video Recorder NVR-CV 2.2 Installing the 3.
Network Video Recorder NVR-CV Step 2: Put the HDD to the HDD bracket (tray) Chapter 2 Hardware Installation 2-4
Network Video Recorder NVR-CV Step 3: Fasten the HDD on the bottom bracket with three screws Step 4: Insert the HDD tray back to the chassis Chapter 2 Hardware Installation 2-5
Network Video Recorder NVR-CV Step 5: Push the HDD tray to the chassis until it has been firmly locked Chapter 2 Hardware Installation 2-6
Network Video Recorder NVR-CV Chapter 3 Driver Installation Chapter 3 Driver Installation 3-1
Network Video Recorder NVR-CV The NVR-CV comes with an AutoRun CD-ROM that contains all drivers and utilities that can help you to install the driver automatically. Insert the driver CD, the driver CD-title will auto start and show the installation guide. If not, please follow the sequence below to install the drivers.
Network Video Recorder 3.1 NVR-CV Installation Insert the NVR-CV CD-ROM into the CD -ROM drive and install the drivers from Step 1 to Step 6 in order. Step 1 – Install Chipset Driver 1. Click on the Step 1 - INF folder and double click on the infinst_autol file 2. Follow the instructions that the window shows 3. The system will help you install the driver automatically Step 2 – Install VGA Driver 1. Click on the Step 2 - VGA folder and select the OS folder your system is 2. Double click on the .
Network Video Recorder NVR-CV 1. Click on the Step 4 - AUDIO folder and double click on the SETUP.exe file 2. Follow the instructions that the window shows 3. The system will help you install the driver automatically Step 5 – Install AHCI Driver 1. Click on the Step 5 - AHCI folder and select the folder of AP 2. Double click on the iata_cd.exe file 3. Follow the instructions that the window shows 4.
Network Video Recorder NVR-CV Chapter 4 I/O Information Chapter 4 I/O Information 4-1
Network Video Recorder 4.
Network Video Recorder NVR-CV Chapter 4 I/O Information 4-3
Network Video Recorder 4.
Network Video Recorder NVR-CV 4.
Network Video Recorder Chapter 4 I/O Information 4-6 NVR-CV
Network Video Recorder NVR-CV 4.
