Owner`s manual

13
Chapter 3- Operation
3.1 Operation
SELECTING THE IPOD
To select the iPod from the radio, press the button that would
normally activate the factory CD changer. This button varies
by vehicle manufacturers. In some applications the PXDP is
accessed like an XM reciever, In these cases you will press
the appropriate activation button. Some radio models require
pressing the “Seek >” button once, after pressing the CD
button. Yet, it may also be necessary to press Play on the
iPod itself to begin playback. In some cases, if it is the first
time selecting the iPod from the radio it may take up to three
minutes for the PXDP to initialize.
CONTROLLING THE IPOD FROM THE RADIO
With the PXDP interface, the radio will control the iPod as
if it were a factory CD changer. Therefore, operation will be
done by using the same buttons you would use to control
a factory CD changer. For more details on your particular
radio, consult your vehicle’s owner’s manual.
The PXDP interface allows you to skip songs forward and
backwards and also to fast forward and rewind through a
particular song. In general, most radios will utilize “seek” or
“track” buttons to control these functions.
CONTROLLING THE IPOD FROM THE IPOD
The PXDP interface allows you to keep full control of the
iPod from the click wheel. You can browse files and change
playlist on the iPod. You can also skip songs forward and
backwards from the iPod. The PXDP interface does not
disable any functionality of the iPod!