Owner`s manual

26
Make Model Year Part # Harness Dip Switch Settings* Vehicle Specific Notes
Toyota
Sienna 2006-2007 PXDP PXHTY3 or PXH2TY1 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness
Solara 1999-2005 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness
Solara 2006-2007 PXDP PXHTY3 or PXH2TY1 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness
Supra 1998 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness
T100 1998 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness
Tacoma 1998-2005 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness
Tacoma 2006-2007 PXDP PXHTY3 or PXH2TY1 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness
Tercel 1998 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness
Tundra 2000-2007 PXDP PXHTY3 1,2,4,8 ON When using the PXHTY3 the green wires must be cut on the PXHTY3 harness
Prius All Years Not Compatible
Highlander 2008 Not Compatible
Make Model Year Part # Harness Dip Switch Settings* Vehicle Specific Notes
Volkswagen
All Models 1998-2006 PXDP PXHVW1 1,8 ON Trunk Mounting Location
All Models 1998-2006 PXDP PXHVW2 1,8 ON For use with Single DIN radios
All Models 2003-2006 PXDP PXHVW3 1,8 ON For use with Double DIN radios
PXHVW3: When using the PXHVW3 harness, connect the loose black lead to suitable chassis ground. If equipped with factory satellite, remove the blue OEM sub harness from the main OEM harness to plug in the PXHVW3 harness.
PXDP: Not compatible with any factory external audio source such as: XM tuner, CD changer, or Cassette player. These devices must be disconnected during the installation and will no longer function. Not compatible with vehicles equipped with a factory
Navigation system. When possible, we recommend using the PXHVW2 or PXHVW3 harness and install the PXDP behind the radio. This will avoid the possibility of inherent noise problems with the factory VW CD changer cable that is found in some vehicles.
Double DIN (4” Tall) VW radios require the PXHVW3 to connect behind the radio.
PXDP: Not compatible with any factory external audio source such as: XM tuner, CD changer, or Cassette player. These devices must be disconnected during the installation and will no longer function. When using the PXHTY3 with 2006-2007 vehicles the
green wires must be cut on the PXHTY3 harness. Fully compatible with factory installed Toyota Navigation Systems. Not compatible with Hybrid vehicles.
IMPORTANT VOLKSWAGEN APPLICATION INFORMATION
IMPORTANT TOYOTA APPLICATION INFORMATION