Owner`s manual

5
•Vehicles that incorporate a security-code protecting the
radio. If the car’s battery or the radio’s power plugs are
disconnected, the radio will not operate without re-entering
the security-code. If you have access to the security-code,
feel comfortable disconnecting the battery and the radio’s
power connectors. Otherwise, do not disconnect the battery
and exercise extreme caution while handling exposed 12V
power or ground wires/connectors.
PROPER MOUNTING LOCATION
Securely install the interface in a location free from; heat,
humidity, moving parts or direct sunlight. Beware of hot-
air flow from your vehicle’s climate control system. We
recommend securing the interface to a suitable location, free
of sharp metal edges, using; double sided tape, Velcro or
wire ties.
1.3 Configuration and Harness Selection
This section will instruct you on how to properly identify and/
or confirm the proper interface dip-switch configuration and
vehicle specific harness selection.
Use the guide located in the back of this manual on page 18
to locate your vehicle, inform you of the proper dip-switch
configuration for the interface, and the vehicle specific
harness that you will need for your particular vehicle.
Depending on the type of PXDP kit you purchased, it might
include a bundle of different vehicle harnesses or none at all.
If the kit contains many harnesses, only one will be needed
for your specific vehicle. If the kit came without any vehicle
harness, your authorized iSimple® dealer will have the
harness for you to purchase separately.
PXDP Interface Docking Cable
Vehicle Specific Harness