Operation Manual

6.73 Sbandpass2 134
time
time
time
0.75V
0.25V
Figure 79: Behavior of Sample & Hold module.
Figure 80: A Sample & Hold module is used to generate pseudo random signals.
6.73 Sbandpass2
This module is a static second-order band-pass filter (-6dB/octave). It is the same as the Bandpass2
module but without the playing interface. The center frequency and resonance are static and set at
the time of construction.
Typical Use
See Vocoder example, Figure 78, under RMS module.
The default value of the following parameters is set at construction
• Center frequency: frequency of the middle of the passing band.