Operation Manual

6.81 Stereo Audio Out 140
Note: See also Audio In.
6.81 Stereo Audio Out
The Stereo Audio Out module is used to output stereo signals. It has two inputs, the
first sent to the left audio channel of the sound card, the second to the right channel. For
the saturation characteristics of this module, refer to the Audio Out module.
Typical Use
A stereo signal can be produced from a mono signal using a Panpot module. Here sound
sources one and two are transformed to stereo using the Panpot modules:
Figure 84: Use of Panpot module and a Stereo Audio Out to obtain a stereo output.
Note: See also Audio Out.
6.82 Stereo Chorus
The Stereo Chorus module implements a wide range of stereo
effects such as flanging, chorusing and vibrato. This module has
three inputs and two outputs. The first and second inputs are re-
spectively the left and right audio signals to be filtered while the
third input is a modulation signal. The outputs are respectively the
left and right filtered signals.
The Stereo Chorus module consists, as shown in Figure 58, of
two Flanger modules, one for the left channel and one for the right
channel, with cross feedback between the two channels.