Operation Manual

3.2 Creating an instrument 49

Figure 25: The Builder area.

The help area

The help area is located above the construction area. This is where information about the module

currently selected is displayed. The information found here is limited to what is needed to create

patches in the Builder. For more information on the functioning of a module or the controls ap-

pearing on its front panel, please consult the reference section of this manual or its online version,

which can be opened from the Tassman Help menu.

3.2 Creating an instrument

Choosing modules

The ﬁrst step in creating an instrument consists in adding the modules it will be made from.

• To add a module, drag it from the Browser to the construction area, it will appear at the

speciﬁed location.

• If you want to include many identical modules in your instrument, you can copy it using the

Copy/Paste commands from the Edit menu or use the Duplicate command (Ctrl-D/Apple-

D).