Operation Manual

6.20 Control Voltage Sequencer with Songs 87
6.20 Control Voltage Sequencer with Songs
This module is the same as the Control Voltage Sequencer but with song mode added. For more
information about the song mode, please refer to the Multi Sequencer module documentation.
Note: see also Multi-Sequencer, Control Voltage Sequencer, Single Gate Sequencer, Single
Gate Sequencer with Songs, Dual Gate Sequencer and Dual Gate Sequencer with Songs.
6.21 Damper
This module is used to receive signal from a MIDI sustain pedal (MIDI controller number 64).
It has no input and one output, the damper signal, which is equal to 1 when the sustain pedal is
depressed and to 0 when it is released. This module has no front panel control.
Typical Use
The following patch is used to reproduce the behavior of a piano damper pedal with a MIDI sustain
pedal. This combination of modules is often used with Multimode objects.
Figure 40: A Damper module used to play Marimba