Operation Manual

6.24 Dual Gate Sequencer with Songs 90
The tempo display will adjust the speed of the pattern. The ext/int switch will determine if it is
the internal clock (int) that sets the tempo or an external source (ext) such as another sequencer or
a Sync Lfo.
The swing knob will introduce a swing feel to the rhythm of the pattern. The gate buttons
control the gate output. The gate output will generate a square pulse of 1/8 of a quarter note for
each active gate buttons. To hear a step, the gate button must be clicked (green light on). You have
two sets of gate buttons, one for each pattern.
The loop buttons are used to set the length of the Patterns from 1 to 16 steps. Note that the loop
point is set for both patterns at the same time. The shift knobs delays the output of their respective
gate.
Typical Use
In this example, one Dual Gate sequencer is used to control two Player modules.
Figure 42: Dual Gate Sequencer controlling two Player modules.
Note: see also Multi-Sequencer, Control Voltage Sequencer, Control Voltage Sequencer
with Songs, Single Gate Sequencer, Single Gate Sequencer with Songs and Dual Gate Se-
quencer with Songs.
6.24 Dual Gate Sequencer with Songs