User Guide EN Owner manual

103Dialog 4223 Professional/Dialog 4225 Vision
Settings
Melody Ringing
If you want to replace the ring signal with personal melodies when your
phone rings, you can program one melody to signal an internal call, a
second melody for an external call and a third melody to signal a
Callback call.
Dialog 4223 Professional:
PhoneSet Press (see display).
If
PhoneSet is not shown, press more... until it appears.
Select Press (see display).
Down or Up Press to frame Melody Programming (see display).
Select Press (see display).
Continue with section Melody mode.
Dialog 4225 Vision:
Å Select PhoneSet in the top menu (see display).
Down or Up Press to frame Melody Programming (see display).
Select Press (see display).
Continue with section Melody mode.
Melody mode
The display shows Melody Mode and if there is a stored and activated
melody for internal calls (Line 1), external calls (Line 2) or Callback
calls (Inquiry), the corresponding key lamp is switched on.
In melody mode you can:
• Program new melodies
• Edit or delete stored melodies
• Activate or deactivate stored melodies
Exit Press if you want to exit melody mode (see display).
Note: If you do not press any key within 30 seconds, melody
mode is automatically cancelled.