User's Manual

**Boost mode should only be used in low
temperature environments with adequate
clearance of exhaust / intake vents. A tripod
is highly recommended. DO NOT block
vents while operating in Boost mode.
34
Picture Settings
Picture Mode
• Changes the picture mode to
different settings depending on
your usage
Color Mode
• Adjusts the color temperature
from warm to cool (red to blue)
Slideshow Time
• Sets the timing of a transition
Projection
• Flips the projected image
Aspect Ratio
• Changes the aspect ratio of the
picture - Auto, 4:3, 16:9*, etc.
Upgrade
• Firmware can be upgraded with
upgrade le in the USB
*Caution: Some pictures may be cut off
when aspect ratio is set incorrectly