User's Manual

Technical Details

Chapter 5

IMAGE IS BLURRED

Possible Causes Solution

The Projector is not in focus Adjust the focus with the focus adjustment dial

until the image comes into focus

The Projector is offset from plane / angle of

operation

Move the projector so that it is both 180 degrees

and on an evern plane with the screen.

NO SYNC, NO SIGNAL

Troubleshooting

1. Be sure to setup the computer to enable a video signal output. On some lap-

tops this is done by pressing and holding Function F5 key. If using the M6 as

an external monitor on Windows based systems, this can be done by selecting

“extend my desktop to this monitor”. The native resolution of the M6 projector

is 1920x1080. Depending on the video driver different resolutions may need to

be selected for proper output.