aaxa TECHNOLOGIES P4 Wi-Fi Pico Projector User Guide
Caution! WARNING: Please use this product as instructed. Misuse may cause injury or death. DO NOT use while driving DO NOT expose to water or wet surfaces.
The AAXA P4 Wi-Fi runs the Windows CE operating system. All Standard Functions can be found on the Home Screen and can be manipulated with the keypad on the projector. Because we dislike locked devices, rather than locking the Windows CE Desktop we have decided to leave this function unlocked. This allows users to enjoy the full capabilities of the Windows CE operating system. However if you choose to access the desktop, please make sure you know what you are doing.
Table of Contents 2 Chapter 1: P4 Wi-Fi at a glance 2 Main Unit Front/Back 3 Remote & Keypad 4 Accessories 5 Chapter 2: Getting Started 5 Powering On / FF 6 Focus Adjustment / Throw Distance 7 External Inputs /Input Sources 8 Connecting to a Computer 10 Connecting to Composite Video 12 Connecting to Speaker or Headphones 13 Connecting to Mouse/Keyboard 15 Connecting to Wi-Fi 16 Connecting to Wi-Fi Manually 17 Computer Data Transfer 19 Saving to USB/SD card 20 Connecting a Micro SD Card 21 Connecting to a U
P4 Wi-Fi at a Glance Main Unit Front/Back/Side Chapter 1 Back Button Power Button Confirm Selection Reset Hole Micro SD Card Port Focus Adjustment Projection Lens Directional Pad Charge Indicator Mini USB Port Full USB Port Power Input VGA Input A/V Input Headphone 2
Remote & Keypad Power On/Off Main Menu Navigation Select Source Media Player Menu Navigation Power Direction Pad Exit/Back Both the keypad and remote can be used to navigate through the menus. The Main Menu Navigation on the remote functions exactly the same as the directional pad on the P4 Wi-Fi unit. NOTICE: Pressing power on the remote will only put the projector in STANDBY mode. Please press the power button on the projector if you want to turn it off.
Accessories Tripod Power Adapter Remote Mini USB to USB Adapter Keyboard/Mouse VGA Cable A/V Cable *Under various circumstances, the actual accessories may be different from those shown in the pictures above.
Getting Started Chapter 2 Powering ON the projector 1. 2. 3. Connect the power cord to the P4 Wi-Fi. Connect the wall plug into the wall power source. Press POWER button and hold for 2-3 seconds to switch on or switch off the power • The LED turns red while charging. • The LED turns green when charging is finished. • 4 hours of charge time is required to reach a full charge. Powering OFF the projector 1. 2. Press and hold the power button for 3 seconds.
Focus Adjusment / Throw Distance Focus Adjustment 1. 2. Spin the focus wheel left of right until the image becomes clear. The recommended focus distance for this projector is 12” to infinity. Throw Distance Chart Distance inch (“) 12 18 24 30 36 74 84 96 Diagonal Inch (“) 6.3 9.5 12.6 15.8 18.9 38.9 44.2 50.5 DIA GO NA LS CR EE NS IZE 16:9 Aspect Ratio Throw Ratio 1.
External Inputs/Outputs Micro SD Card 802.
Connecting to a Computer Step 1: Connect the large end of the to your computer’s VGA Cord Step 2: to your P4’s Connect the small end of the Step 3: VGA Adapter VGA Cord VGA Adapter In the Main Menu Then Select “Source” Change resolution 8
Connecting to a Computer Cont. Step 4: Enabling VGA output on your Computer – To enable VGA output on your computer most computers require “turning on” the video output feature. Each computer is different. Please consult your owner’s manual for instructions to enable VGA output. Below are standard instructions for a Windows XP computer – not all systems are the same. Step 5: Press function & “F5” to instruct the computer to enable multiple displays.
Connecting to Composite Video Step 1: Connect one end of the to your P4’s Composite Cord A/V Adapter Step 2: Connect opposite end of to your devices Composite Cord Composite Cord 10
Connecting to Composite Video Cont. Step 3: In the Main Menu Then Select “Source” Choose Composite Video Step 4: Turn on your multimedia device. Connectivity with multimedia devices The P4 Wi-Fi can connect to many media devices including: iPod, iPhone, iPad, VHS players, DVD players, smart phones, cameras, video game consoles and other peripherals with ease. *Apps on smart phones require video out capabilities to be displayed with the P4.
Connecting Speakers/Headphones Step 1: Connect your speaker to your P4’s or headphones 3.5 mm cord Speaker Adapter Step 2: Ensure the power and volume on your speaker or headphones is turned on Step 3: Place headphones/earphones in/over ears Caution for Earphone (Earplug) Use • Prolonged use at high volume may impair your hearing.
Connecting Keyboard/Mouse Step 1: Remove the USB Adapter from the back of your Keyboard /mouse combo Step 2: Connect your keyboard/mouse combo’s to your P4’s USB Adapter USB Input Step 3: Move the ON/Off Switch on the side of the combo. Step 4: Press the “red” button to sync the wireless usb adapter to the keyboard.
Connecting Keyboard/Mouse The Keyboard/Mouse that is included helps give you full functionality of the P4 Wi-Fi. A USB mouse can be used to select most options on the P4 Wi-Fi. • To move the cursor, place 1 finger on the pad located on the right and move your finger in the direction you wish to move the mouse. • Hover over your selection and click the left mouse button. • A keyboard can be used in the “desktop” feature. Please refer to the “Desktop section of the manual for a more detailed explanation.
Connecting to Wi-Fi Upon start up you will be presented with a screen that will list your available discovered networks. You will be prompted to choose a preferred network. Step 1: Find your preferred network and double click it with your keyboard.
Manually Connecting to Wi-Fi There is also the option to connect to an access point manually if you aready know the configration such as IP, subnet mask, and default gateway. You will need to enter windows by clicking Desktop fro the home menu Step 1: Enter Windows CE by clicking Desktop from the home menu Step 2: Navigate to settings and then you should be able to click on your network card to bring up a manual connection prompt.
Computer Data Transfer Only Step 1: Connect small end of the Step 2: to your P4’s USB Adapter Connect opposite end of Micro USB Input to your computer’s USB Adapter USB Port Connecting your P4 Wi-Fi to your computer for data transfer allows you to add files to store onto the onboard memory. This will allow you to play files with your P4 Wi-Fi as a standalone device.
Computer Data Transfer Only Step 3: Turn On the P4 Wi-Fi and open the OR “Open to view files” that autoplays. NAND hardrive Step 4: Place files in appropriate folders Image files go here Video files go here Music files go here Note. If your computer fails to detect the projector, check to make sure the cable is securely inserted on both sides. If you’re still unable to view the folder, please consult with your operating system’s owner manual.
How to Save Files to your Sd or USB In order to correctly display your media files SD or USB, the files must be placed in the correct folder. Step 1: Create folders “movie”, “music”, and “picture” in all lowercase. To do this, right click on your mouse on an empty space in your SD or USB’s main folder.
Micro SD Card How to insert your Micro SD Card • Slide in your SD card into the SD card slot on the front of the P4. (as shown in picture) • Gently slide the SD card until it *clicks* into place. How to access your Micro SD Card • Once your SD card has been inserted, you can navigate through the main menu to select what you want to view under each sub menu.(Videos, Photo, Music) • After selecting SD card mode you should now be able to access the data on the SD device through the onboard media player.
USB OTG(On-the-Go) How to insert your USB Drive • Slide your USB Drive into USB slot. (as shown in picture) • Gently slide the drive until it cannot go in any further. How to access your USB Drive • Once your USB Drive has been inserted, you can navigate through the main menu to select what you want to view under each sub menu.(Videos, Photo, Music) • After selecting USB Drive Mode you should now be able to access the data on the USB drive through the onboard media player.
Menu Screens Chapter 3 Main Menu The P4 Wi-Fi features a built in PMP (Portable Media Player) function. This function allows the projector to play videos, pictures, music files, and text. To access the main menu simply turn on the projector. • • • Scroll Left/Right by pressing the rewind/fast foward buttons To select a submenu, highlight the desired submenu and press the Play/Pause button located in the middle of the keypad or remote.
Video Player Menu Rewind / Back Pause Play/Stop Fast-Foward / Next Open File Volume Down Volume Up Opening a file: • Choose “Open File” option • Select device file is stored on • Select file from list 23
Video Player Menu Playing Videos To play/pause a video, press the play button in the middle of the keypad or remote control To rewind, press and hold the left arrow button To fast-forward, press and hold the right arrow button To jump forward to the next vide, press the right arrow button To jump back to a prior video, press the left arrow button To adjust the volume, press the vol+ (on the remote) to increase and vol- (on the remote) to decrease the volume Note: If the video is large, please allow the proj
Photo Menu Close Menu Previous Next Run Slideshow -1 sec to slideshow +1 sec to slideshow Open File Opening a file: • Choose “Open File” option • Select device file is stored on • Select file from list 25
Photo Menu Viewing Pictures The P4 Wi-Fi Pico Projector allows you to view pictures individually or in a slideshow. To view individual photos, select the file you want to view in the file menu for the particular storage device on which the image file is stored. You can press the left and right arrow buttons on the touch pad or remote to flip through the pictures you have in the present folder.
Music Player Menu Previous Play Stop Next Open File Repeat Shuffle Playlist Volume up Volume down Opening a file: • Choose “Open File” option • Select device file is stored on • Select file from list 27
Music Player Menu Listening to music To play/pause a song, press the play button in the middle of the keypad or remote control To rewind, press and hold the left arrow button To fast-forward, press and hold the right arrow button To jump forward to the next vide, press the right arrow button To jump back to a prior video, press the left arrow button To adjust the volume, press the vol+ ( on the remote) to increase and vol- ( on the remote) to decrease the volume *Review Specification section of this manual
Productivity Menu Word Editor Excel Editor Powerpoint Editor PDF Viewer From this menu you are able to access the Windows Microsoft Suite that is embedded into the P4 Wi-Fi. You can access and edit various files as long as they are available through SD, USB, or the onboard memory.
Softmaker Serial Softmaker is an embedded software that allows the P4 Wi-Fi to become a stand alone editor for on-the-go changes to your presentations. You can find your Softmaker Serial number on the back of this manual. Entering the Softmaker Serial will register the devices software to you and allow you to access the software features past the 30-Day trial. Upon start up the software prompts for your user information.
The Windows CE Desktop allows users to load, install, and manipulate any third party applications that are supported by Windows CE including word processing, spreadsheets, games, and other applications. A Keyboard and Mouse is REQUIRED to use the Windows CE Desktop NOTE: To Exit Desktop mode, double click the button located on the desktop! Technical Support for the Desktop is not available. Please direct any questions to aaxatech. forumotion.com and we will do our best to assist you.
Setup Menu The Settings Menu can be accessed by selecting “Settings”on the main menu Sound & Display Volume Settings • Allows the raising or lowering of volume Picture Adjustment • Brightness, backlight and color temperature options IMAGE FLIP • Flips image upside down (for rear projection) Date and Time • Adjust Date and Time • The projector allows you to choose from different languages To choose the language of your choice, highlight the language you want and press play.
Chapter 4 Technical Details Troubleshooting IMAGE IS BLURRED Possible Causes Solution The Projector is not in focus Adjust the focus with the focus adjustment dial until the image comes into focus The Projector is offset from plane / angle of operation Move the projector so that it is both 180 degrees and on an evern plane with the screen. No Sync, No Signal 1. Be sure to setup the computer to enable a video signal output. On some laptops this is done by pressing and holding Function F5 key.
Technical Details Troubleshooting THE PROJECTOR DOES NOT TURN ON Possible Causes Solution There is no power Check to ensure the power outlet or battery source is good. check the power adapter to ensure a proper connection with the wall outlet as well as the proejctor. Confirm that the unit is charged and has enough power The power button was not held long enough To power on the projector, the power button needs to be depressed for a full 3 seconds.
Technical Details Troubleshooting Wi-Fi Wi-Fi Does Not Connect Possible Causes Solution Router is not assigning proper authentication Check to see that your routers are on. Many times when devices need to connect a router reset might be needed. Pull the power cord on your router and try reconnecting when the router has stabilized Router is not accepting encryption key Ensure that you are entering the proper authentication key with the proper encryption settings.
Specifications Brightness Native Resolution Maximum Resolution Contrast Ratio Projectoin Lens: Image Size: Lamp: Video in: Wireless: Audio Output: SD Card USB: Dimensions Weight Supported File Formats 100 Lumens WVGA(858x480) WXGA(1280x800) 2000:1 Manual Focus 10~80 inches 20,000 hour RGB Triple LEDs Composite A/V VGA(mini-VGA) 802.11 b/g 1.0 W stereo speakers 3.5 mm audio jack SD-HC Card Slot (32GB maximum) USB OTG (On-the-Go) (Memory Sticks) USB Data Transfer 172x71x31mm 0.5 lbs AVI, MPG.
Please direct all customer service inquiries to: AAXA Technologies, Inc. 103A East Alton Santa Ana, CA 92707 (714) 957-1999 info@aaxatech.
