Product manual
:HOGLQJHTXLSPHQW
7HFKQLFDO'HVFULSWLRQ
16
Teknbeskr_eng.fm
:LUHIHHGV\VWHP$($($(/
There are two options of wire feed systems: bobbin or marathon pac.
A314E/A324E-L should be used for gas arc welding.
:LUHIHHGV\VWHP$($(/
The wire feed system A314E/A324E-L meets Arc Welding & Application Equip-
ment’s recommended layout setup. This means the robot has a full working area
within a section of ±150° for A314E/A324E-L, around axle 1. Great care should be
exercised outside of this sector, e.g. when programming otherwise the welding
equipment can be damaged.
It is intended to be mounted directly on the robot IRB 1400/IRB 2400L, which
results in a short cable bundle and a good wire feed, furthermore, a smaller floor
area is required.