Product manual
:HOGLQJHTXLSPHQW
,QVWDOODWLRQ
22
Installation_eng.fm
,QVWDOODWLRQRIWKHZLUHIHHGV\VWHP
The cables are connected as follows (see Figure 10):
Feeder cable 1 $(Feed unit - Control cabinet
23-pole connection at both ends
Feeder cable 1 $($(Foot of the robot - Control cabinet
23-pole connection at both ends
)HHGHUFDEOH$( Feed unit - Control cabinet
12-pole connection at Wire feed unit and 19-pole connection
at Control cabinet.
)HHGHUFDEOH$($( Foot of the robot - Control cabinet
12-pole connection at foot of the robot and 19-pole connection
at Control cabinet.
Gas (red hose). Connected to the central gas supply or to the gas cylinder.
The pressure guard functions as an RSHQFRQWDFWGHYLFH which means it
makes with a rising pressure. The guard is precalibrated to 0.2 bar (equiva-
lent to approx. 5 l/min.). The guard indicates when the gas is finished or if
an object prevents the gas flow.
Connection 287 for water (red hose).
Connection ,1 for water (blue hose).
Air in (PVC hose '). Connected to the compressed air supply, system
pressure, approx., 6 bar.
Welding cable 95 m
2
.
Wire guide input for bobbin and Marathon Pac.
Finally connect the current cable from the wire feed unit to the power source.
Figure 10
j5000843
8
7
6
54
3
1
2