Product manual

Welding equipment
Appendix 5
Appendix5eng_Config.fm 69
11 Appendix 5
Loading of configuration file
#*******************************************************************
#
# (c) ABB Automation Technology Products AB,
# Arc Welding & Application Equipment
#
# File: ESABMig_FhpE.cfg
# Description:
# ArcWeld PIB EIO-parameter configuration for PowerSource
# ESABMig 400t/500t and WireFeeder A314E/A324E
# with DC Pulsed Tacho.
# Speed range 0.5 to 30 m/min.
# Created:
# Written by:
# Version 1.0
# 1.0 LOJ
# Initial Release
#
#*******************************************************************
If you have received a config file on a CD, see example above, you can install it as
follows:
1 Copy the cfg-file to a floppy, or use a PC/ Laptop and the Ethernet/ Service
channel, use the FTP client to transport files manually between the PC and
the robot controller storage memory. These actions are carried out in the
same way as in a file manager or in Windows Explorer.
2 With the System Parameter Window of the Teach Pendant displayed select:
FILE\ Add or replace parameters\
3 Select the cfg-file from the floppy, or from the directory that the file was
transferred to.
4 Make a restart.
More information can be found in the User´s Guide.