Product manual

Welding equipment
Safety
Säkerhet-svetsutr_eng.fm 7
2 Safety
2.1 General
The purchaser/user of ABB’s robot welding equipment is responsible that the
equipment is installed and used in the manner stated by the supplier. Also adhere to
the standards and safety directives of respective countries.
Read carefully through all the manuals supplied, especially the section covering
safety, before unpacking, setting up, or using the station.
This equipment is only intended for gas shielded arc welding, so-called MIG/MAG
welding, and may only be used in accordance with the instructions set out in the
documentation. With all other usage of the equipment we disclaim all responsibil-
ity and any claims for damages or warranty undertakings. Follow the directives of
respective countries.
The equipment is not intended for use in explosive environments.
Save all manuals supplied!
2.2 Manufacturer’s declaration
A manufacturer’s declaration, as set out in the Machinery Directive 89/393/EEC,
Annex II B is supplied with all deliveries to EU and EEA countries. See Figure 1.