Datasheet

2 - 2CDC002137D0201
Miniature circuit breaker S 200 S
Technical data
General data
Standards IEC/EN 60898-1
Number of poles 1P, 3P
Tripping characteristics B, C
Rated current I
n
6 ... 20 A
Rated frequency f 50/60 Hz
Data acc. to IEC/EN 60898-1
Rated operational voltage U
e
1P: 230 V AC; 3P: 400 V AC
Power frequency recovery voltage (U
max
) 1P: 253 V AC; 3P: 440 V AC
Minimum operational voltage 12 V AC
Rated insulation voltage U
i
Phase to ground 250 V AC
Phase to phase 440 V AC
Rated short-circuit capacity I
cn
6 kA
Energy limiting class 3
Overvoltage category III
Pollution degree 2
Rated impulse withstand voltage U
imp
(1.2/50 µs) 4 kV (6.2 kV @ sea level; 5.0 kV @ 2,000 m)
Dielectric test voltage 50/60 Hz, 1 min.: 2 kV
Reference temperature for tripping characteristics 30 °C
Electrical endurance 20,000 operations
Mechanical data
Housing material Insulation group II, RAL 7035
Toggle Insulation group II, black, sealable
Contact position indication Marking on toggle (I ON / 0 OFF)
Degree of protection IP20, IP40 in enclosure with cover
Mechanical endurance 20,000 operations
Resistance to shock acc. to IEC/EN 60068-2-27 25g, 2 shocks, 13 ms
Resistance to vibrations acc. to IEC/EN 60068-2-6 5g, 20 cycles at 5...150...5 Hz with load 0.8 In
Environmental conditions acc. to IEC/EN 60068-2-30 28 cycles with 55 °C / 90-96% and 25 °C / 95-100%
Ambient air temperature Operation -25 … +55 °C
Storage -40 ... +70 °C
Installation
Terminal Line-side Failsafe bi-directional cylinder-lift terminal
Load-side Screwless terminal (2 openings for one cable each)
Cross-section of conductors Line-side 35 mm²
Load-side 1 ... 4 mm² (rigid or flexible wires without end sleeves)
1 … 2.5 mm² (flexible wires with end sleeves)
Cross-section of busbars Line-side 10 mm²
Load-side –
Tightening torques 2.8 Nm
Recommended screw driver Pozidrive 2
Mounting on DIN rail On DIN rail 35 mm acc. to EN 60715 by fast clip
Mounting position Any
Supply Bottom
Dimensions and weight
Mounting dimensions acc. DIN 43880 Mounting dimension 1
Pole dimensions (H x D x W) 89.0 x 69.0 x 17.5 mm
Pole weight 0.100 kg
Combination with auxiliary elements
Auxiliary contact, signal contact, shunt trip, undervoltage release Yes