“When You Need More Than Staples.” Toll Free: 800-658-8788 Fax: 801-927-3037 info@abcoffice.
Safety Rules • • • • • • • • • • Ensure that at no time more than one person is working at the machine. Leave the key for the safety lock with the person responsible for the cutting machine. Power operated cutting machines must be operated only by trained and reliable personnel. Part of the training is to become familiar with the operating instructions. The operating instructions must be accessible at any time and must be strictly observed. Do not reach into cutting area while the knife is in operation.
The entire machine is dispatched in one package, but the stand (#7) and the hand wheel (#19) for the paper clamp have been dismounted from the machine. The tool box contains: • • • • • a set of tools for service and maintenance, the mounting hardware for the stand, the back gauge crank (#3) with a mounting screw, two keys for the safety lock. Place machine (#1) on stand (#2). Insert securing bolts for the stand into provided holes and secure with nuts. Place paper tray (#8) into the stand (#7).
Turn main switch (#11) to position “|” (on), in order to begin operation. The main switch can be sued as an EMERGENCY SWITCH, which stops the machine immediately. • Safety lock with key (#6) The key can be removed to prevent unauthorized use. To activate the machine, turn key 45º to the right. • Re-set button (#12) Before the knife can be activated on models IDEAL 4810 and IDEAL 5210, the re-set button has to be pressed to re-establish the “ready to cut” status of the machine.
Turn to the right: back gauge moves towards the knife. Turn to the left: back gauge moves away from the knife. For precise setting of the measurement always move the back gauge from the back towards the knife. • Measuring scale Under the viewing window (#14) the measurement scale rotates in accordance with the back gauge movement. The exact measurement is to read beneath the indicator. To avoid inaccuracies, the scale has to be read vertically from above.
The knife change must be executed by one person only. The cutting edge of the knife is extremely sharp. In order to avoid injuries, the knife has to be handled with the utmost care. Transportation of knife is only permitted in specially designed wooden cases, which are supplied with every spare knife ordered from your local distributor. The following description applies to model IDEAL 4810-11.
19. Make a test cut with a paper pile using the full cutting height. If necessary do a final adjustment with the cutting depth adjustment screw (#4). 20. IMPORTANT – The clamp bar must be adjusted in a way that the cutting edge of the knife in its home position is covered by the clamp bar. Changing of cutting stick Should the bottom sheet of a paper pile not be cut across its full length, the cutting stick (#2) must be turned, rotated or exchanged.
1. 2. 3. 4. The guide grooves and all other moving parts of the clamp assembly. The knife carrier guide channels (left and right). They are located between the knife guide plates. All moving parts of the knife drive system. To reach these parts, the lower machine cover (#9) and / or the front table (#13) must be removed. The back gauge spindle, its housing points, and the back gauge guide mechanism.