Service manual

ABM International, Inc. Series 1018, 1022 & 1026 V7.0
Model: Innova Users Guide
Proprietary information of ABM INTERNATIONAL, Inc. furnished for customer use only.
No other uses are authorized without the prior written permission of
ABM INTERNATIONAL, INC.
11
3.5 Changing the Bobbin
Large Bobbin- (M) - Release Latch
Pull the release Latch and remove the bobbin case
Remove the old bobbin and press in the new bobbin. Inset the bobbin making sure it turns clockwise
when the thread is pulled (viewed from the bobbin side). Pull the loose thread up and under the guide
into the case. Route the thread under the tension spring, and through the guide hole. Place the loose
thread through the case slot.
Now press the case back into the hook and listen for the latch clicking into place.
You are now ready to begin sewing.