Service manual

ABM International, Inc. Series 1018, 1022 & 1026 V7.0

Model: Innova Users Guide

Proprietary information of ABM INTERNATIONAL, Inc. furnished for customer use only.

No other uses are authorized without the prior written permission of

ABM INTERNATIONAL, INC.

3.7 Quick Reference – manual and stitch regulated modes

Operating in manual mode –

Step 1: Quickly pressing and releasing the (Red) left hand button will toggle the machine between needle up and

down position.

Step 2: Press and release the (Green) right hand button and the sewhead will start to run

Step 3: Press and hold the (Green) right hand button and the sewhead will increase sewing speed.

Step 4: Press and hold the (Red) left hand button and the sewhead will decrease sewing speed.

Step 5: Press and release the (Green) right hand button again and the sewhead will stop.

Operating in stitch regulated mode –

Step 1: Quickly pressing and releasing the (Red) left hand button will toggle the machine between needle up and

down.

Step 2: Press the #5 button on the control panel and stitch regulation (SR) is activated. The main screen of the

display will show “Sr” when stitch regulation is activated.

Step 3: Press and release the (Green) right hand button and the sewhead will start to run

Step 4: The faster you move the machine the faster it will run.

Step 5: The slower you move the machine the slower it will run.

Step 6: Press and release the (Green) right hand button again and the sewhead will stop.

Step 7: Press the #5 button on the control panel and stitch regulation mode will turn off.