Service manual

ABM International, Inc. Series 1018, 1022 & 1026 V7.0
Model: Innova Users Guide
Proprietary information of ABM INTERNATIONAL, Inc. furnished for customer use only.
No other uses are authorized without prior written permission of
ABM INTERNATIONAL, INC.
6
Final Test:
Inspect the front of the machine and ensure that the sewhead is free of obstructions. Upon power up the
LCD will read UP or DN and display a speed.
Step 1: Press and release the (Red) left hand button and the needle will move to the up position.
Step 2: Press and release the (Red) left hand button again and the needle will move to the down position.
Step 3: Press and release the (Green) right hand button and the sewhead will start to run
Step 4: Press and hold the (Green) right hand button and the sewhead will increase sewing speed.
Step 5: Press and hold the (Red) left hand button and the sewhead will decrease sewing speed.
Step 6: Press and release the (Green) right hand button again and the sewhead will stop.
Setup and inspection is now complete.