PCMCIA Fax Modem Quick Installation Guide

3. The New Hardware Found dialog box will
appear. Select Driver from disk provided
by hardware manufacturer, and click OK.
4. Insert the device driver diskette for the
PCMCIA Fax Modem 56K. Type A:\, and
Windows 95 will install the modem driver
for you autmatically.
5. Connect the FAX/MODEM interface cable
and hook up the RJ-11 plug to the telephone
line outlet.
6. Restart Windows 95. Now your fax/ modem
is ready to go.
 Note: Insert FAX/MODEM before running the
communication program.
Installation for Windows NT
1. Make sure the 56K Fax/Modem PC Card is
well connected into the PCMCIA slot.
2. Run Windows NT 4.0.
3. Double-click the Modem Icon in Control
Panel.
4. In the Install New Modem window, click
Next to detect the modem automatically.
5. Click the Change button to change the
modem type.
6. Click Have Disk... button.
7. Insert the INF file driver diskette into the
floppy drive.
8. Enter the path “A:\”, then press OK.
9. Click OK to accept the modem type
“PCMCIA 56Kbps FAX + Modem”.
- 3 -