PCMCIA Fax Modem Quick Installation Guide

2. Run Windows NT 4.0.
3. Double click the Modem Icon in Control
Panel.
4. In the Install New Modem window, press
the Next button to detect the modem
automatically.
5. Press the Change button to change the
modem type.
6. Press the Have Disk... button.
7. Insert the INF file disk bundled with the
fax/modem PC Card to the floppy drive.
8. Enter the path A:\ and press OK button.
9. Press OK to accept the modem type
“PCMCIA 56Kbps FAX + Modem”.
10. Press Finish button. The installation is now
completed and the Fax/Modem PC Card is
ready to go.
Installation for Windows 2000
Once the PCMCIA Fax Modem 56K PC Card
is plugged into your PCMCIA slot, Windows
will prompt you a standard PCMCIA Card
Modem has been installed. You can use the
Microsoft built-in driver, or perform the
following procedures to update the latest driver.
- 5 -