Installation Guide

no mess
fast
diy
- RAZER KNIFE
- GROUT FLOAT
- TAPE MEASURE
- PENCIL
- LEVEL
- PRY BAR
- TILE SPACERS (OPTIONAL)
- GROUT (OPTIONAL)
tools you’ll need:
- Wall/substrate must be free of any debris,
dust, and/or loose paint.
- Wall must be leveled, non-porous, smooth,
dry and flat.
- Wall/Substrate can be laid over an existing
tile surface, as long as it meets the substrate
requirements above.
step 1 surface preperations:
Using a tape measure, pencil, ruler and level
(if needed), mark out the measurements of
your space.
step 2 measure the wall
- Roll out the adhesive onto the wall
(inner side facing the wall). We
recommend rolling the roll out in a vertical
direction for a strong bonding (top to bottom).
- Follow any markings made previously
to ensure a straight line. Repeat process with
the entire wall.
step 3 adhere adhesive
membrane to wall
- Using a razer knife, carefully cut through any
openings and remove the excess adhesive.
step 4 outlets/faucets/shower
heads
for more detailed
installation tips, search
“instaset tile adhesive”
on youtube.com
FIND MORE INSTASET RATED TILE
PRODUCTS ON GBMGLASS.COM
have questions? call us
1 [phone]
- Using a grout float, firmly press down the
adhesive.
step 5 firmly press down
- Using a clean rag, wipe down the back of the
tile/mosaic. Make sure the backing of the
tile/mosaic is dry and smooth.
- Tile should be as flat as possible.
- Must achieve >80% direct bonding to the
adhesive.
step 6 clean the tile
- Peel the top protective layer of the Instaset
membrane to expose the front facing adhesive.
step 7 peel
- Following the lines drawn previously, gently
press the tile onto the adhesive. Use a pry bar
for adjustments/repositioning when needed.
- Firmly press the tile into the wall to secure
bonding.
step 8 stick
- Grouting may be optional depending on the
usable and application. Check with the tile
manufacturer’s guideline for more details.
step 9 grouting (optional)
instaset quick installation guide
C
M
Y
CM
MY
CY
CMY
K