Installation User guide

1 Connection of 230V mains supply with primary fuse (T 250V 250mA).

2 230V AC / 12V DC transformer.

3 Terminal connector strip for siren, flashlight, programmable output, loudspeaker, 12V DC power supply

and alarm zones.

4 Tamper contact of alarm panel housing.

5 Terminal connector strip for standby battery.

6 Terminal connector strip for control units.

7 Terminal connector strip for extra transistor outputs or the optional relay module.

8 Room for 12V standby battery (7Ah) and cabling.

Note for 230 V connection

Do not switch on the mains power yet!

Connect the mains power to the terminal connector strip as follows:

Phase (black)

ground (green/yellow)