ABUS WIRELESS ALARM SYSTEM These installation instructions are published by Security-Center GmbH & Co. KG, Linker Kreuthweg 5, D-86444 Affing/Mühlhausen. All rights including translation reserved. Reproductions of all kinds – e.g. photocopy, microfilm, or storage in computer systems – require the express written permission of the publisher. Reprinting prohibited, even in part. These installation instructions correspond to the state of the art at the time of printing.
ABUS WIRELESS ALARM SYSTEM These installation instructions are an important product accessory.They contain important installation and operation information.Bear this in mind if you pass the product on to others. Store these installation instructions in a safe place for future reference. For a list of contents with page numbers, see page 3.
Chapter 1 Contents Chapter 1 Contents ................................................................................................................................................................................ 1-3 Chapter 2 Software installation .............................................................................................................................................................. 2-4 Chapter 3 Overview of the software menu options ..................................................
Chapter 2 Software installation Follow these instructions to install the ABUS Up/Download software on your PC. 1. Insert the CD-ROM supplied in your CD/DVD drive and open the ABUS folder. 2. Double-click the UploadDownload icon. 3. You receive a security warning. Confirm with Run. 4. The Installation Wizard starts. You are then asked to select a setup language. 5. 6. Select a language and click Next. The installation now takes place in the selected language. Click Next when prompted to do so.
Chapter 3 Overview of the software menu options After starting the program, you are asked to enter your password. The factory default of this password is abus. Enter this password and press OK. The factory default of this password is: abus The software starts. 3.
Chapter 4 Creating a new client To make changes to your ABUS wireless alarm system, you first have to create a new client. Select the Clients dropdown menu. You can now change the information on the Client information page. Enter a serial number under Client Number. Enter a name. Enter a telephone number. Enter a U/D telephone number. This number is dialled if you make a remote call by modem. Enter the city, the state and the ZIP code. Enter a comment. Select New client.
After changing the configuration settings, go to the Client information window and select Loca for a direct USB connection or Remote for modem connection. If you select Local, you can start programming the equipment. If you select Remote, you first have to connect to the client. To do this, select the Comm dropdown menu. Select Upload all to transfer data from the client to the PC. Select Download all to transfer data from the PC to the client. Select Dial to panel to establish a remote connection.
Chapter 7 Installer menu To program your wireless alarm system, use the Installer dropdown menu. In this menu, you can set the following: Select System to program system macros and the PIN code. Select Communication to make settings for alarm calls. Select Devices to make settings for wireless sounders. Select Zones to make settings for zones. Select Utility outputs to make settings for relays. Select User codes to define authorities of the user PINs. Select WL button to make settings for remote controls.
7.2 Devices Under Devices, you make the settings for the wireless sounders. Select Installer -> Devices -> Sounder. Select the siren type: External Internal None Select whether the siren emits an alarm signal and/or an acknowledgement. Select how long the external siren emits a visual alarm. Select the strobe frequency. Select the duration of the visual acknowledg ement. Select whether the siren emits a visual acknowledgem ent. Make your settings in the dropdown menu.
7.4 Utility outputs Under Utility outputs, you make the settings for the switched outputs. Select Installer -> Utility outputs. Enter the utility output label via the keyboard. Select the configuration (pattern) from the dropdown menu. If an output was selected as N/O Pulse, select the pulse duration. If you select the Zone group, you can define here whether one or all zone events have to be fulfilled for activation/deactivatio n.
7.6 Follow Me Under Follow Me, you make the settings for the events that cause an alarm to be transmitted by telephone. You also define the remote access phone code that has to be entered if you want to access the system from outside by telephone. Select Installer -> Follow me. Enter the remote access phone code via the keyboard. This code has to be entered by telephone to dial into the system. For every phone number, doubleclick Event. A new menu opens.
Chapter 8 End-user menu To program your wireless alarm system, use the End-user dropdown menu. In this menu, you can set the following: Select Status to display the status of the system. Select Scheduling to program a schedule for the automatic arming/disarming of the system. Select User settings to program user PINs, enter Follow Me numbers, and activate voice messages. Select User operations to arm/disarm partitions, activate utility outputs, override tampering, and test system components. 8.
8.2 User settings Under User settings, you program the user PINs, the Follow Me numbers and the types of messages to be transmitted. In the dropdown menu, select User PIN. Enter the user’s first and last name and a four-digit user PIN. You cannot make any changes to the authority level and the partition authority. After making all settings, send the data to the client. Click to send the screen data and confirm with Yes. The data is transferred to the client and the Application succeed dialog box opens.
8.3 User operations Under User operations, you can perform system functions such as arming and disarming partitions, controlling utility outputs, etc. You can also test partitions. Select functions and confirm the dialog. Chapter 9 Comm Under Comm, you can upload screen data or all data, and send screen data or all data to the client. You also use this dropdown menu for calling the system via a modem (remote) connection. Upload screen – Select to upload data from the client.
