User manual

English

If the pairing process was not successful, repeat the

steps.

Opening detector

 Enter a name for the component.

 Open the room list and select the room where the

component is installed. Tap the arrow to return to the

settings.

 Now tap "Next".

 Follow the instructions in the app.

Note

If the pairing process was not successful, tap "Pair",

open the magnetic contact's battery compartment

and then close it again.

Motion detectors

 Enter a name for the component.

 Open the room list and select the room where the

component is installed. Tap the arrow to return to the

settings.

 Now tap "Next".

 Follow the instructions in the app and then complete the

process.

Note

If the pairing process was not successful, tap "Pair",

press the catch on the underside of the motion

detector, remove the motion detector from the

housing rear panel and press the pair button.

Smoke alarm/heat detector

 Enter a name for the component.

 Open the room list and select the room where the

component is installed. Tap the arrow to return to the

settings.

 Now tap "Next".

 Follow the instructions in the app and then complete the

process.