User manual

Configuration
95
Linkage Action tab
Select the Linkage Action tab. Here you can configure
the response of the recorder in the event of an alarm by
ticking the corresponding box.
Parameter
Notifications
Full Screen Monitoring
The camera is displayed in
full screen in live view.
Audible Warning
The device emits a repeated
signal tone.
Notify Surveillance
Centre
The CMS emits an audible
warning tone.
Send Email
An email is sent to a
specified email address. See
page 92.
Trigger Alarm Output
The alarm output is triggered
in the event of an alarm.
PTZ Linking tab
Here you can control specific PTZ presets, patrols or
patterns for a taught-in camera.
Parameter
Notifications
PTZ
Select the camera to be controlled
using a PTZ command in the event of
an alarm.
Call Preset
Select the preset number.
Call Patrol
Select the patrol number.
Call Pattern
Select the pattern number.
 Confirm the settings by clicking on Apply and exit
the menu by clicking on OK.
Alarm Output tab
Parameter
Setting
Alarm
Output No.
Select the alarm output to adjust the
settings.
Alarm Name
Enter a clear description, e.g. warehouse
door contact.
Dwell Time
Select the dwell time for switching the
alarm output.
 Activate the alarm output by ticking the "Settings"
box.
 Define the schedule for the recorder alarm output in
the event of an alarm under "Settings".
 Click on Copy to apply these settings to other
cameras.
 Confirm the settings by clicking on Apply and exit the
menu by clicking on Back.