Instructions / Assembly

IN41153 / IN41154 / IN41155 / IN41156
INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions, as you may need them at a later date.
CAUTION
GENERAL
All electrical connections must be in accordance with local and National Electrical Code (N.E.C.)
standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a
qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no parts are
missing by referencing the illustrations on the installation instructions.
1. OUTLET BOX
2. WHITE WIRE
3. GROUND WIRE
4. BLACK WIRE
5. WIRE CONNECTOR
WARNING: Risk of Fire. Consult a qualified electrician to ensure correct branch circuit
conductor. Min 90ºC supply conductors.
Turn off the main power at the circuit breaker before installing the fixture, in order to prevent
possible shock.
ASSEMBLY AND INSTALLATION
1. Secure the mounting plate (6) with mounting screw (8) to the outlet box (1).
2. Pull out the outlet wire and ground wire from the outlet box (1). Make wire connections.
--Ribbed wire (w/o marking) from light to White wire (2) from power source.
--Smooth wire (w/o marking) from light to Black wire (4) from power source.
--Loop the ground wire (3) to mounting plate (6) with a ground screw (7).
3. Attach the back plate (10) against the outlet box (1), secure with the screws (9).
4. Install bulbs: (bulbs not included)
(Do not exceed the maximum capacity recommended on the sockets).
INSTALLATION IS NOW COMPLETE
1500 Cherokee Parkway, Suite 100, Acworth, GA 30102
P: 866-845-5451 • F: 866-816-6165
E: [e-mail] • www.acclaim-lighting.com
6. MOUNTING PLATE
7. GROUND SCREW
8. MOUNTING SCREW
9. SCREWS
10. BACK PLATE