Network Router User Manual

4. The Internet Protocol (TCP/IP) Properties window appears. On the General tab:

1) For the case DHCP Server of Smart Router is enabled, enable Obtain an IP

address automatically and click OK.

2) For the case DHCP Server of Smart Router is enabled or you want to set the IP

address by yourself, enable Use the following IP address and fill in the IP

address field with the address of the same subnet with Smart Router, for example,

192.168.1.100; the Subnet mask field with value 255.255.255.0 and the Default

gateway field with the IP address of Smart Router (192.168.1.254) and then click

OK.