Instruction manual

VIB

Tilt LED:

LED light on = Tilt mode on; LED light off = Tilt mode off;

Flashing LED light = Tilt in warning mode

Beam Shield LED:

LED light on = shielding the laser beam in this axis

Power on/off:

Press button, the lasers power is on, and the power LED

light goes on.

When the power is turned on, the laser is in the

electronic self-leveling mode with an 800rpm rotate speed and

there is no beam shield area for approximately 90 seconds. The

laser will automatically enter into the “TILT” mode and the LED

light goes on.

Tilt mode:

Press button, the LED light will go on and the unit will be in

the

TILT mode. If the unit is moved or bumped while in operation,

the laser will stop rotating and the laser beam and TILT LED will

both flash. Pressing the TILT button again will turn the TILT mode

off and the laser will electronically self-level itself and begin rotation.

Note: The TILT function does not operate in the slope mode.

Vibrate mode:

Press button, the LED will light, which means laser is in

vibra

te mode. Vibrate mode allows continuous operation during

high winds, vibrations and shocks. Slight movements are ignored

and the laser self-levels only if significant movement occurs.

Press button again, to turn vibrate off.

VIB

1467H-English 8/6/08 10:07 AM Page 7