Instruction manual

Press the SLOPE button to enter the SLOPE function. The SLOPE on

X-axis is set as the default. SLOPE LED light on in X-axis.

Press button to adjust the slope angle on X-axis. Press the

SLOPE button again to change the SLOPE to the Y-axis. SLOPE

LED light on in Y-axis. Press key to adjust the

slope angle on Y-axis. If the SLOPE angle is beyond its range, the

laser will stop rotating and alarm horn will sound. When it is in

SLOPE mode, the laser will exit TILT mode automatically.

Sleep mode:

Press the sleep button on the remote control to turn on/off the

sleep mode.

The laser will not self-level and the laser beam will

shut off. The power LED light will stay on and all other LED lights

will turn off. All the buttons on the laser key pad will not operate

except the power button. All the buttons on remote control will

not operate except the sleep button. The laser will turn off after

30 min sleep. When turning off the sleep mode, the laser will

return to the mode it was previously in.

Alarming mode when beyond self-leveling range:

When the laser is tilted beyond its self-leveling range, it will stop

rota

ting and laser beam will blink and the alarm will sound.

1467H-English 8/6/08 10:07 AM Page 9