User Manual Please read the manual carefully before using this charger. We thank you that you have decided to purchase our intelligent charger. Please follow the safety and care instructions in this manual, to be able to use this device efficiently and safely.
User Manual English Important notes: Use the IQ338XL charger only with Li-Ion / LiMnO2 cells with 3.6V-3.7V and NiCd, NiMH cells with 1.2V rechargeable batteries. With the IQ338XL you can automatically charge the following types of cells: Li-Ion: 33700, 26650, 26700, 22650, 18700, 18650, 17670, 18490, 18500, 17500, 17355, 16340 (RCR123), 14500, 10440. NiMH/NiCd: AA, AAA, A, Sub-C, C Baby, D Mono, 9V Do not use the charger with other types of batteries (for example: Alkaline or other Systems).
User Manual English Inputs: DC 12V / 3,5A Outputs: Six independent charging slots, two of them for 9V batteries One 5W USB output 5V / 1000mA Buttons: Battery slot select buttons Mode selection button (MODE) Charging current selection key (CURRENT) 3/7
User Manual English Display: The following values are apparent on the display during a charging process: Program (Charge, Charge Test, Discharge Test) Battery Voltage (V) Capacity (mAh) Elapsed time (hh:mm) Internal resistance (mR) Charging current (mA) „End“ (Appears if actual charging process finished) Channel number Display Description Function Description: You can choose the following programs: Charge In this program you can charge the inserted batteries.
User Manual English label “CH” for charged and “DISCH” for discharged value over the unit “mAh”. Also the current is changing depending on the chosen current during the Charge-Test. The used charging current is symbolized by „CH-CURRENT“ as well as the discharging current by „DISCH-CURRENT“. Generally, the charging capacity value can be different to the discharging capacity value because of efficiency of the chemical reaction in the batteries. This mode can also be used very well for refreshing batteries.
User Manual English Charge: If you like to charge one or more batteries, it distinguishes between same type or different cells: Batteries of the same type Firstly, insert the batteries into the charger. The charger registers the inserted batteries and starts to identify the battery chemistry. By default, the charge process and a charging current of 500 mA gets selected automatically. The same conditions will be used for all inserted batteries and can be changed through pressing the mode button.
User Manual English Maintenance: The chargers is maintenance free, but should be cleaned sometimes. The charger should be disconnected from the power supply before start cleaning. Use only soft and dry tissues (like cotton textiles) do not use any liquid. Disclaimer: The manufacturer and supplier is not responsible for incorrect or improper use and the resulting consequences. Any repair or modification that is not performed by the original supplier will void the warranty.
