User Manual

6.
Using of battery
1 as long as the power cord is connected to the AC 220V, that is to charge the battery .
2 When electronic scales under voltage indicator blinks to indicate low battery, please plug
in the power to charge the device .
3 When electronic scale show Lob, said serious low battery. At this time will stop weighing
function, please immediately shut down equipment and plugged in to recharge the battery .
4 Electronic scales on first use, please charge the battery, it is recommended charging time
is more than 24 hours to ensure the battery into safe, stable working conditions
5 Recommended to charge immediately when the battery undervoltage in normal use, in
order to avoid long time work under the undervoltage state，it may damage battery and shorten
the service life of the battery; Suggest that more than 12 hours per charge time . If not use for a
long time, we should pay attention to every two months to deal with a single battery charge,
recommended charging time 20 to 24 hours a time, in order to make up the deficiency of battery
caused by the loss of itself , Protect the battery from damage, prolong the service life of the
battery.
7.
Maintenance and precautions
1 In order to ensure clarity and service life of electronic scales, electronic scales in this
paragraph should not be placed directly under sunshine, or location should be relatively smooth .
2 Should not be placed where severe vibration and dust, to avoid the use in wet
environments.
3 Do not use strong solvents (such as: benzene and Nitro-based oils) to clean the cabinet.
4 It should not be injected the liquid or other conductive particles into the electronic scale
to prevent damage and electric shock .
5 Built-in electronic scale battery is a consumable, does not belong to warranty scope.
6 Within one year of the date from the sales of this paragraph electronic scales, under
normal conditions of use, non-artificial problems belong to the warranty scope, the user will set
the product and warranty card (the correct number) back to our service point or suppliers.
Production plant implementation of a maintenance of the equipment. This paragraph does not
allow arbitrary electronic scales open, otherwise no warranty .