Specifications

ACS-61100 User’s Manual
CUSTOM ARRAY CONFIGURATION
1. To change the details of an Array go to RAID
Configuration > Create Array > Custom Array
Configuration. See the screen below for configuration
details.
2. Use the  arrow keys to select the array. Press Enter.
3. Use  to select:
3.1 RAID Level. Press Enter.
3.1.1 Use  to select the RAID Level between
0,1,5,6, 0+1. Press Enter.
3.2 Init Type. Press Enter.
3.2.1 Use  to select On-The-Fly or Evaluation.
Press Enter.
Note: On-The-Fly is the recommended type as it
contains parity.
3.3 Stripe Size. Press Enter.
3.3.1 Use  to select between 8k, 16k, 32k, 64k,
128k or 256k.
Note: The recommended stripe size is 256k.
3.4 Drive Member. Press Enter.
3.4.1 Use  to select Add.
3.4.2 Use  to select the disk to add. Press Enter.
3.4.3 Repeat step 3.4 as necessary to add all
required disks.
4. Use  to go to CREATE. Press Enter.
1. Go to custom
RAID Config.
2. Select Array.
3. Enter the RAID
Level, Init Type,
Stripe Size and
Disks.
4. Go up to
CREATE.
28