Installation Guide

ManualsBrandsAchim ManualsCellular Shades27 in. W x 64 in. L Top Down-Bottom up Honeycomb White Cordless Cellular Shade

For best results, we suggest using vacuum cleaner or dry cloth to remove dust.

For spot-removal try using light damp cloth to wipe the spot clean. Do not use

any kind of chemical to clean the shade as it may damage the shade.

outside mount

inside mount

step 1. installing the brackets

step 2. installing the shade

step 3. assembling the operation handle

cleaning your shade:

Note: 1. Avoid placing brackets over the spring box or cord pulleys.

2. When installing brackets make sure the brackets do not catch the shade cord(s) against the head rail.

step 4. operating the shade

Lowering shade:

Simply grasp the center of

the bottom rail and pull

the shade down to desired

length and release.

To lower shade

Pull down

Raising shade:

Simply grasp the center of

the bottom rail and push

it upward to the desired

length and release.

To raise shade

Push up

side view

Locate the center of the

each of the rails. Gentle

lift the shade material out

of the way. Fasten the top

of the handle onto the

middle backside of either

the bottom or top rail

depending on the operation

handle.

Secure the

brackets with the

mounting screws

provided.

When mounting

brackets on wall

board or plaster,

use the wall

anchors provided.

Secure the

brackets with

the mounting

screws

provided.

Pencil mark the mounting

screw holes at the back of

the bracket.

Drill holes at the pencil-

marked locations.

Use level at top of brackets

to ensure straight

alignment. Shade needs to

be level for proper

operation.

Pencil mark the mounting

screw holes at the top of

the bracket.

Drill holes at the pencil-

marked locations.

Position the brackets near

each end of the head rail.

Insert the flange of the top rail onto

the top of the bracket as shown in

the drawing then snap-in the rear

part of the rail onto the tab of the

bracket in a twisting motion.

Lowering the headrail:

Simply push down on the

headrail to lower it to

desired position and

release.

Raising the headrail:

Simply push up on the

headrail to raise it to

desired position and

release.

Dear Customer:

1) Metal measuring tape

2) Pencil

3) Phillips screwdrivers

4) Step ladder or stool

5) Drill & bits (1/8 ”)

6) Level

Tools needed for installation

U.S.A Patent No. 6,837,294 & Others Patents Pending

Rotate the handle

upwards until it snaps

into place.

Rotate the handle

downwards until it

snaps into place.

We hope you enjoy your new purchase!

If you have any questions regarding this product or the instructions

Please call Achim’s Family of Home Furnishings

Customer Service at 1-800-54-ACHIM

Visit our website at www.achimonline.com

Made in Taiwan, Finished in China

V-30

Thank you for purchasing our product. We want to reassure you that

our main design focus with window blinds/shades is child safety, and

we guarantee this with your new, Top Down Cordless Honeycomb

Cellular Shades. In addition, we hope that you enjoy its ease of use and

installation. We look forward to your continued patronage in the future.

Hardware contents

(A4) x 4

mounting Screw

(1-1/8”)

(A5) x 4

wall Anchor

(A1) x 2

bracket

(A2) x 1

operation handle

(A3) x 1

bottom rail top rail

Top Down Cordless Honeycomb Cellular Shades