Installation Guide

Achim Home Décor: 1-800-54-ACHIM
[e-mail]
Troubleshooting:
BOTTOM RAIL IS UNEVEN:
Raise the blind to the top and lower the blind using center of the bottom rail.
Lower the blind to approximately 3 ft from the headrail. While holding one side of the
bottom rail, adjust the other side of the headrail as needed to align.
Raise and lower from the center of the bottom rail twice to check consistency and repeat
above steps, if necessary.
DIFFICULTY ATTACHING HEADRAIL INTO MOUNTING BRACKETS:
Make sure the bracket is correctly secured to the window or wall.
Identify that the front of the headrail is connecting with the front lip of the bracket.
Make sure that he bracket is not interfering with the internal components of the blind.
Tilt the top of the headrail towards the bracket (window) and the bottom of the blind
towards yourself.
Care of your new blind:
CLEAN:
Dust gently with a clean, damp non-abrasive cloth.
USAGE:
Do not over-extend blind.
Take care to not over tighten tilt wand, as this could break the hanging loop.
Proper installation and operation will extend the life and beauty of your new blind.
PLEASE NOTE:
This cordless blind cannot be shortened. This blind is intentionally made longer to allow for
slat tilt operation. Altering the size of this blind will compromise the function of the blind.
If additional assistance is needed, please contact our customer service center at the phone
number or email address listed below.
5
Installation Instructions for Cordless GII
Morningstar 1-in. Light Filtering Mini Blind