Operation Manual

If you have trouble burning a CD, go to the troubleshooting section.

This is what the cd burning window looks like.

The options on this screen are described below.

Writer

Select a CD writer if you have more than one CD writer in your computer.

Speed

Choose a CD writing speed. In some cases, burning at a slower speed may improve the success rate of burning

and may be more compatible in some older CD players. If you have a CD writer with Burn Proof type protection,

you can burn at maximum speed without worrying about a burn failure.

Test Mode

In this mode, the CD writer will not turn it's laser on for writing and will go through the process of transferring the

data to CD. If you are having problems burning a CD, go to our troubleshooting area.

Convert To WAV First

This will convert the mix to one or more WAV files on your hard drive. CD quality WAV files use up around 8 MB

for every audio minute that you are burning. Therefore, a 74 minute mix will take up around 650 MB or hard drive

space. The advantage to converting to WAV first is that it may help the success rate of burns for some older CD

recorders, especially if your CD writer does not have Burn Proof.

Create CD-TEXT

Some CD writers support CD-TEXT. If your CD writer supports CD-TEXT, you should be able to check the CD-

TEXT box to burn CD-TEXT. When you burn CD-TEXT, the software adds text to each CD track so that when you

play the CD on a CD player that *supports* CD-TEXT, you can see the titles and names of each track. Usually,

Sony CD players support CD-TEXT.

You can type in a CD-TEXT title for the CD's title. Track names will be derived from any CD track markers.

Burn As One Track

This option essentially skips any CD track markers in the project and makes the whole thing one track. If your

burner is only supported in IMAPI mode this is a good option for a seamless mix because IMAPI mode will always

put a two second gap between tracks. (The main drawback is that you can't seek to tracks in the CD player.)

Burn All Or Selection

Choose Burn All to burn up to 80 minutes of audio, depending on the capacity of your blank CD.

Choose Burn Selection to burn the current selection of audio. This can be useful if your mix goes beyond 74 or 80

minutes and you want to burn the extended sections. (Note that it simply uses the selection box to define a time

range to burn.)

Back Up Your Project To CD

Page 16 of 93Mixcraft 4

2/7/2008file://C:\acoustica\mixcraft\hel

\flat-manual\mixcraft.htm