Operation Manual

If the mix is already playing, pushing the record button on and off allows you to punch in and out of recording
mode.
Recording Problems?
Recordings Are Not In Sync
Recordings Are Drifting Or Getting Out Of Sync Over Time
Recording Resources
A
rming A Track
Setting Recording Levels
Changing To ASIO Mode
Using A Recording Timer
Playback Controls
The playback controls include play/stop, fast forward, rewind, fast forward to the end, and rewind to the start.
Play / Stop
Starts and stops playback at the current playback indicator position. Learn how to repeat or loop a section of audio
here.
Rewind
Rewinds the playback indicator by a measure or so.
Fast Forward
Fast forwards the playback indicator by a measure or so.
Rewind To Start
Resets the playback indicator to the start of the project.
Fast Forward To End
Resets the playback indicator to the end of the project.
Playback Position Display
This is the green readout that shows the current playback indicator time or measure and beat position. In addition,
the display will show the current tempo, time signature and key.
Loop Play Back Mode
In some cases, you might want to play a section of audio over and over. For example, if you are practicing a part
before recording or adjusting effects on a section, you might want to loop a selected area of audio.
This should not be confused with looping sounds, though.
To loop an area of the project, make a selection as shown below.
Page 59 of 93Mixcraft 4
2/7/2008file://C:\acoustica\mixcraft\hel
p
\flat-manual\mixcraft.htm