Operation Manual

Loop Play Back Mode

Loop play back of a selection or the entire project so that you can play along with it or edit effects.

Use Recording Timer

Set a recording timer which allows you to automatically end a recording.

Project Settings

This shows the Project Details Tab so that you can edit the project key, tempo, time signature, author information,

global effects and the recording folder.

Track Menu

Add Track

This appends a new audio track . (Ctrl+G) or a new Virtual Instrument Track (Ctrl+E) to the end of the project.

Insert Track

This inserts a new audio track or a new Virtual Instrument Track before the currently selected track.

Duplicate Track

This copies all settings and sounds on the selected track and puts it on a new track inserted after the selected

track.

Move Track Up (Ctrl+Shift+U)

This moves the selected track up one spot.

Move Track Down (Ctrl+Shift+D)

This moves the selected track down one spot.

Track Height

This pop ups a sub menu to set the selected tracks height to Small, Normal or Large.

Choose Image...

This pops up the Track Image dialog so that you can pick a new track image.

Freeze Track (Ctrl+Shift+F)

This freezes the selected track.

Delete Track

This deletes the selected track.

Mute Track (Ctrl+M)

This mutes or unmutes the selected track. A check mark indicates that the track is muted.

Solo Track (Ctrl+L)

This solos or un-solos the selected track. A check mark indicates that the track is soloed.

Arm Track

rms the selected track.

Set Volume

This pops up a sub menu that allows you to set the exact volume of the selected track or choose from 20% to

200% volume.

Set Pan

This pops up a sub menu that allows you to set the pan of the selected track.

Page 76 of 93Mixcraft 4

2/7/2008file://C:\acoustica\mixcraft\hel

\flat-manual\mixcraft.htm