Technical Specifications

Acoustic Ceiling Products (ACP) – Classic X Section 09 53 36
February 26, 2013 SUSPENDED GRID SYSTEM
Digicon Information Inc. Page 3
C. Sustainable Design:
1. Section 01 35 18: LEED documentation procedures.
2. Provide required LEED documentation for Product [recycled content] [regional
materials].
3. Manufacturer's Certificate: Certify that Products meet or exceed [specified
requirements] [_____].
1.6 QUALITY ASSURANCE
A. Conform to CISCA requirements.
B. Grid Manufacturer Qualifications: Company specializing in manufacturing the Products
specified in this section with minimum [three (3)] [_____] years [documented] experience.
C. Grid Installer: Company specializing in installing the Products specified in this section,
authorized or certified in writing by the product manufacturer.
1.7 REGULATORY REQUIREMENTS
Use this article when a special code, regulation, or constructed assembly applies to the project; delete this
article if none apply. Coordinate Regulatory Requirements with the assembly ratings required.
A. Conform to applicable code for fire rated assembly.
B. Conform to local building code seismic requirements. Conform to Seismic Zone [0] [1]
[2] requirements.
1.8 PROJECT CONDITIONS
A. Section 01 32 13: Work scheduling.
B. Sequence work to ensure ceilings are not installed:
1. until building is enclosed,
2. sufficient heat is provided,
3. dust generating activities have terminated, and
4. overhead work is completed, tested, and approved.
1.9 DELIVERY, STORAGE AND HANDLING
A. Section 01 66 00 for storage and handling of materials.
B. Deliver materials in manufacturer's original, unopened, undamaged containers with
identification labels intact.
C. Store cartons laid flat, protected from exposure to sun, high temperatures and humidity
conditions as recommended by the manufacturer.
1.10 EXTRA MATERIALS
A. Section 01 78 46: Extra materials.