Datasheet
HOW TO ORDER
• EXAMPLE: CA14NH2,5-10KA2020 10DT SNP PI WT14117-BA
• EXAMPLE: CE14NH2,5-10KA2020 10DT SNP PI WT14117-BAV0
• CA14 • CE14
1 - Series
P (standard) M N Z D E T F
2 - Rotors
Through-hole SMD models
Bulk (blank)...
(1)
On request
T&R (Tape and reel) (N.A.)
(2)
On request
4 - Packaging
(1) If blank, bulk packaging is implied.
(2) N.A. - Not Available: Tape and Reel packaging is only available for SMD terminals.
100 Ω ≤ Rn ≤ 1MΩ: ±20% 2020
1 MΩ ≤ Rn ≤ 5MΩ: ±30% 3030
For out of range values: Rn > 5MΩ, tol : +50% - 30% 5030
Special tolerances available: <5% ... 10%, etc.
7 - Tolerance
Standard (1000cycles) -(leave blank)
Long life: LV + the number of cycles. ex: LV10 for 10000 cycles
(1)
LVXX: ex: LV10
8 - Operating life (cycles)
(1) Others on request.
At beginning of track, CCW: Off - On PCI
At end of track, CW: On - Off PCF
9 - Cut track
One detent at the beginning DTI
One detent at the end DTF
X number of detents XDT: 10DT
10 - Detents (DT)
Detents readily available: 1, 2, 3, 4, 5, 6, 8, 9, 17, 22, 27, up to 38 -evenly distributed along 260º±3º.
Others on request.
SNAP IN P SNP
SNAP IN R SNR
11 - Crimped terminals (SNAP IN)
Taper: Lin (A) Log (B), Antilog (C)
100 Ω / 100 1KΩ / 1K
Value Rn … / … … / …
5 MΩ / 5M 2,2 MΩ / 2M2
5 - Resistance value
Other resistive values available on request.
Lin - Linear A
Log - Logarithmic B (on request for CE)
Antilog - Antilogarithmic C (on request for CE)
- Special tapers have codes assigned: CODE YXXXXX
6 - Resistance law / taper
Please, indicate terminal position when ordering a special taper.
Series Rotor Model Packg
Ohm value
Taper Tol Life
1 2 3 4 5 6 7 8
CA14/CE14
N H2,5 -10K A 2020
Standard features
Track Detents
Snap in
Housing Rotor Wiper Lin
9 10 11 12 13 14 15
10DT SNP PI
Extra features
Assembly
Ref # Color Flam.
16 17
WT 14117 -BA -V0
Assembled accessory
Dimensions: 14mm
Protection: • CA14: IP 5 (dust-proof)
• CE14:
IP 5 (dust-proof). Self-extinguishable, to meet UL 94 V-0
Substrate: • CA14: Carbon technology
• CE14: Cermet
Color:
• CA14: Blue housing with white rotor
• CE14: Brown housing with white rotor
Packaging: Bulk
Wiper position: at 50% ±15º
Terminals: Straight, without SNAP IN.
Marking: Resistive value marked on housing. Others on request
Standard confi guration
A drawing is requested to order a customized product. The code assigned will
include all special specifi cations.
Series, rotor, model and total resistive value are given before the special code:
CA14PH2,5 10K CODE C00111.
Customized products
H0 HC0 H2,5 H4 H5 HA5 HL5 V12,5
VA12,5 VL12,5 VR12,5 VD11 VD7,5 V15 V17,5
V15…CFF
HSMD and VSMD models can be available on request.
3 - Model and pitch
• CA14: standard is blue
• CE14: standard is brown
With other colors -See color chart below-, for example, red CJ-color, ex.: CJ-RO
12 - Housing color
36
|
www.acptechnologies.com
|
CA14 CE14
Weltron Elektronik GmbH - Phone: +49 (0) 98 52/ 67 27-0 Fax: +49 (0) 98 52/ 67 27-67 E-Mail: info@weltron.de Internet: www.weltron.de
Weltron Elektronik GmbH - Phone: +49 (0) 98 52/ 67 27-0 Fax: +49 (0) 98 52/ 67 27-67 E-Mail: info@weltron.de Internet: www.weltron.de