Owner's manual

25-62-03
Page 63 of 87
JUN 20/13
ACR ELECTRONICS, INC / ARTEX PRODUCTS
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
B406-4 (453-5004)
connection. See Figure 17. Remote Switch Panel Assembly Outline and Dimensions.
Figure 17. Remote Switch Panel Assembly Outline and Dimensions
SUBTASK 25-62-03-450-002
B. Installation
(1) Provide an opening in the instrument panel or other mounting location which meets the
dimensional requirements shown in Figure 17. Remote Switch Panel Assembly Outline and
Dimensions.
(2) Mount Dzus rails on the sides of the opening, if necessary. See Figure 17. Remote Switch
Panel Assembly Outline and Dimensions for rail center line dimensions.
(3) Install the remote switch panel assembly.
NOTE
: Step (3) may be completed after wiring is completed on the ELT end and the harness
plug has been plugged into the panel assembly, in accordance with the requirements
of SUBTASK 25-62-03-450-008 on page 70. If such is the case, perform a fit check at
this time.
(4) Apply a “For Aviation Emergency Use Only/Unauthorized Use Prohibited” placard as close to
the switch as practical, if required.
NOTE
: This placard is recommended for installations on aircraft that are not pre-placarded
for remote ELT control. If desired, the placard (591-0428) may be ordered from ACR
Electronics Division.
TASK 25-62-03-450-804
5. Buzzer
SUBTASK 25-62-03-450-001
A. Location
CAUTION
: PLACING THE BUZZER IN THE COCKPIT IS NOT RECOMMENDED DUE TO THE
POTENTIAL FOR DISTRACTION. THE BUZZER PRODUCES A LOUD, SIREN-TYPE
SOUND WHEN THE ELT IS ACTIVATED. SINCE THE BUZZER OPERATES IN TANDEM
WITH THE COCKPIT LED, IT WOULD ONLY SERVE AS A REDUNDANT WARNING
INDICATOR IN THE COCKPIT.
(1) Select a suitable location for the buzzer.
CONTROL PANEL
ARTEX AIRCRAFT SUPPLIES,INC
ON
ELT
ELT
ARM
5.74
(146)
5.365
(136.3)
0.185 (4.7)
0.555 (14.1)
1.125 (28.6)
2.24
(57)
4.969
+0.030
-0.000
(126.2 +0.8/-0.0)
3.000 ±0.015
(76.2 ±0.4)
1.13 (29) MAX.
0.69 (18) MAX.
0.37 (9) MIN.
0.06 (2) MIN.
2.094
+0.030
-0.000
(53.2+0.8/-0.0)
FRONT VIEW
TOP VIEW
BACK VIEW
453-0161
DIMENSIONS IN INCHES (MM)
FASTENERS (4)
280-0010
(DZUS PA35-38X1426)