Manual

Artex Products / ACR Electronics, Inc. 570-1000 Rev C
Page 6 of 24
Meazura Operation
The heart of the ETS is the Meazura MEZ1000 manufactured by Aceeca Ltd of
Christchurch, NZ. The Meazura unit uses the PalmOS® operation system. Artex
has customized the operation of the Meazura by utilizing the MZIO™ interface
inside of the Meazura unit. Please note that as delivered by Artex, the MZIO™
interface is not accessible by the user without voiding the Artex warranty on the
ETS. The combination of the “off the shelf” Meazura MEZ1000 with a custom
module that contains the Artex programming hardware interface results in the
Artex ETS.
Note: Aceeca also refers to the MEZ1000 as an “RDA” for “Rugged Digital
Assistant”’ this terminology is encountered on the Aceeca web site and in their
literature.
Controls
The Meazura is controlled with the buttons shown below:
The Power Button is used to turn the unit off and on and when used with the
Backlight Button is used for reset functions described later in this manual.
Operation of the PalmOS® functions of the Meazura unit are described in great
detail in the Aceeca “Meazura MEZ1000 User Guide” available free for download
at www.aceeca.com