Manual

Artex Products / ACR Electronics, Inc. 570-1000 Rev C
Page 5 of 24
Hardware Operation
Prior to use, install battery pack into test set. To close, place the battery pack
with the top end in first. Now push down on the bottom end of the battery pack
ensuring that it is firmly in place. Now push the clip firmly towards the bottom of
the test set until it clicks into place. Charge the ETS battery using the supplied
USB cable connection and wall charger, connect as shown below. Charge for 2 to
3 hours. Upon power-up, follow on screen directions for initialization and setting
the time. The initialization routine is very important to ensure proper function of
the stylus on the test set screen.