Owner manual

25-69-10
Page 15 of 58
APR 30/12
ARTEX PRODUCTS / ACR ELECTRONICS, INC.
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
453-6500
INTRODUCTION
TASK 25-69-10-990-801
1. Manual Usage
SUBTASK 25-69-10-990-001
A. General
(1) This manual describes the operation, installation, and maintenance of the ELT/NAV Interface.
This information is provided to ensure initial and continued airworthiness. Information
presented in this manual is accurate at time of printing, but is subject to change. Refer to the
Artex products web site at www.acrartex.com
for the latest information and any updates to
this manual.
(2) Web links provided in this manual were accurate at time of printing but may be subject to
change.
(3) Regulatory references contained herein are generally confined to United States and Canadian
requirements and, in any case, should not be considered all encompassing. Consult your
national aviation authority for applicable requirements.
SUBTASK 25-69-10-990-002
B. Application
(1) This manual constitutes supporting data/documentation for the ELT/NAV Interface, including:
(a) Description and Operation
(b) Test and Fault Isolation (includes inspection criteria)
(c) Removal
(d) Installation
(e) Illustrated Parts List
(2) In the United States, the ELT/NAV Interface must be installed and maintained in accordance
with the requirements herein and 14 CFR, FAR Parts 43, and 91; and other airworthiness
requirements, as applicable.
(3) In Canada, the ELT/NAV Interface must be installed and maintained in accordance with the
requirements herein and Canadian Aviation Regulations (CAR), Part V and other CAR
airworthiness requirements, as applicable.
(4) ELT/NAV Interface installation and maintenance in all other countries must comply with the
requirements herein and applicable national airworthiness requirements.
(5) To ensure proper operation, only parts listed in the Illustrated Parts List of this manual or
those recommended by ACR Electronics, Inc. may be used as replacement parts for the ELT/
NAV Interface.