Owner manual

25-62-21
Page 39 of 86
JUL 31/12
ACR ELECTRONICS, INC / ARTEX PRODUCTS
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
G406-4 (453-5012)
TASK 25-62-21-750-802
2. Inspection and Test Procedures
SUBTASK 25-62-21-990-001
A. Checklist
(1) Table 5 provides a list of the ELT inspection and testing requirements, a copy of which may be
used as a checklist to verify inspection and test completion. The item numbers in the table
correspond to the item identifiers for each task.
NOTE
: Items 5a through 5h are mandatory requirements only in Canada, in addition to
meeting the other inspection and test requirements listed in Table 5.
Table 5. ELT Inspection and Test Checklist
ITEM NO. DESCRIPTION BY
1 Coax Cable and Wiring Connections Inspection
2 ELT Mounting Tray and Hardware Inspection
3 ELT Battery Pack Inspection
4 G-Switch Functional Check
5a 121.5 MHz Frequency Measurement
5b Audio Modulation Check
5c 121.5/243.0 MHz Power Output Measurement
5d 406 MHz Frequency Measurement
5e 406 MHz Power Output Measurement
5f Current Draw Test
5g Digital Message Verification
5h ELT Reset Check
6 Installed Transmitter Test
7 Antenna Test
8 Inspection and Test Documentation