Owner manual

25-62-21

Page 51 of 86

JUL 31/12

ACR ELECTRONICS, INC / ARTEX PRODUCTS

DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL

G406-4 (453-5012)

REMOVAL

TASK 25-62-21-010-801

1. ELT

SUBTASK 25-62-21-010-001

A. ELT Removal

(1) See "Figure 10. ELT Removal Sequence".

Figure 10. ELT Removal Sequence

(2) Loosen the mounting frame cap thumbscrews.

(3) Slide the mounting frame cap back away from the ELT.

(4) Lift the protective top cover up, away from the ELT and set it aside.

(5) Disconnect the two antenna coax cables from the ELT.

(6) Disconnect the harness receptacle from the ELT, if necessary.

NOTE

: The receptacle may disconnect when the mounting frame cap is pulled back.

(7) Lift the ELT up from the connector end.

NOTE

: Careful use of a flat blade screwdriver as a lever will make this step easier.

(8) Slide the ELT up and out, away from the mounting tray.

PROTECTIVE TOP

COVER ASSY

MOUNTING FRAME

CAP ASSY

ELT MAIN

ASSY

MOUNTING

TRAY ASSY

DISCONNECT COAX

CABLE

DISCONNECT HARNESS

LOOSEN THUMBSCREW

(2 PLCS)

DISCONNECT COAX

CABLE

NOTE: Coax cables and

wiring harness not

shown for clarity.