Owner manual

ACR ELECTRONICS, INC / ARTEX PRODUCTS
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
G406-4 (453-5012)
25-62-21
Page 78 of 86
JUL 31/12
TASK 25-62-21-990-802
2. Registration
SUBTASK 25-62-21-990-001
A. Responsibility
(1) It is the responsibility of the aircraft owner to register the ELT.
(a) If an ELT is moved to a different aircraft (i.e., an aircraft other than the one it was
originally installed on), and/or the aircraft is registered in a new country, the ELT must
be re-registered.
(b) If the aircraft is registered in a new country, the ELT must be re-registered.
(c) The product label must re-marked with the new HEX ID code to indicate new
programming, if applicable.
SUBTASK 25-62-21-990-002
B. Required Information
(1) The following information is required when registering an ELT:
(a) The unique Hex ID code printed on the ELT product label,
(b) The information listed in SUBTASK 25-62-21-990-002, on page 77.
(2) The information (i.e., address, telephone number, etc.), filed as part of the registration
process, should be kept up to date.
SUBTASK 25-62-21-990-003
C. Where to Register
(1) In the United States, the National Oceanic and Atmospheric Administration (NOAA) is the
registration agency.
(2) Specific registration web sites and information may be found at:
(a) The Artex products web site at www.acrelectronics.com, which has links to on-line
registration sites and also a link to registration forms and instructions for a number of
countries.
(b) An ELT may also be registered in the United States by going directly to the NOAA ELT
registration web site at www.beaconregistration.noaa.gov.
NOTE
: NOAA may also be contacted by mail at SARSAT Beacon Registration, NSOF, E/
SPO53 4231 Suitland Road Suitland, MD 20746-4304, or by phone at 1-888-
212-7283 or 301-817-4565.
(3) In other countries, the national civil aviation authority in the applicable country should be
contacted to obtain registration information.